C1850Z - FLAT CORNER - LARGE
- SKU:
- C1850Z
- Availability:
- In Stock
- Weight:
- 0.16 LBS
- Width:
- 2.25 (in)
- Height:
- 2.00 (in)
- Depth:
- 2.25 (in)
- Shipping:
- Calculated at Checkout
Description
Large Medium-duty Steel Flat Corner. Smaller profile. Covers the joint and seams between the extrusions at all corners.
Rivets Required For Installation: 6 OUR RIVETS DO NOT FIT THESE HOLES - EITHER DRILL THE HOLES OUT WITH YOUR 3/16" DRILL BIT OR SMALLER RIVETS MUST BE PURCHASED AT YOUR LOCAL HARDWARE STORE.
Depending on your case design and dimensions, some rivets may require backing washers. Some rivets will install through the aluminum extrusions and therefore require no backing washers.
THIS ITEM REQUIRES NO CUTOUTS IN THE CASE WALL TO INSTALL.
RECOMMENDED USES:
All Cases
MINIMUM RECOMMENDED CASE DIMENSIONS:
N/A
EXAMPLES
- All Cases
ASSOCIATED COMPATIBLE PARTS:
- All Of Our Extrusions
Material: 1.5mm/ 0.059" Steel
2 Reviews
-
Thumbs Up!
Other then the holes being too small for the rivets that were sold to me, this product is of good quality at a great price and it shipped quickly. :::::::::::::::::::: DIY Road Cases® Response ::::::::::::::::::::::::::::: We apologize, but there are a couple of older pieces of tooling floating around that still have the older smaller holes that show up once in a while. That's an easy fix . . simply drill out the holes on the corner at the same time that you are using the corner for drilling the rivet holes in the case walls. Best wishes, Jonathan Beacon Director of Sales & Merchandising DIY Road Cases® 213-341-0026 Ext.707
-
Just what I needed
Awesome product, easy to use, good value.
Related Products
C 1850K - FLAT CORNER - large - black *** OUT OF STOCK AS AT 08/15/22 ****
10231 - FLAT CORNER LARGE - 6 hole
C1860Z - FLAT CORNER - LARGE - female - stacking
