P0644 - TAKE APART HINGE - small
- SKU:
- P0644
- Availability:
- In Stock
- Weight:
- 0.15 LBS
- Width:
- 2.00 (in)
- Height:
- 2.00 (in)
- Depth:
- 0.75 (in)
- Shipping:
- Calculated at Checkout
Description
Small Take-apart Hinge For Hinged Lids That You May Want To Remove - This small take-apart hinge may be utilized in place of our continuous hinge in order to create a hinged lift-off lid without the expense of adding 2 additional twist latches. This hinge is an affordable alternative to 4 latches for removable lids if you are on a tight budget.
Rivets Required For Installation: 4
Depending on your case design and dimensions, some rivets may require backing washers. Some rivets will install through the aluminum extrusions and therefore require no backing washers.
THIS ITEM REQUIRES NO CUTOUTS IN THE CASE WALL TO INSTALL.
RECOMMENDED USES:
Smaller Cases
MINIMUM RECOMMENDED CASE DIMENSIONS:
N/A
EXAMPLES
- All Cases Requiring Hinged Lids
Material: Steel
Related Products
P0625EZ - TAKE APART HINGE - MEDIUM
$3.30
Medium Take-apart Hinge For Hinged Lids That You May Want To Remove - This medium take-apart hinge may be utilized in place of our continuous hinge in order to create a hinged lift-off lid...
P0626EZ - Take-apart Hinge / Large
$3.90
Large Take-apart Hinge For Lift-off Lids - This large take-apart hinge may be utilized in place of our continuous hinge in order to create a lift-off lid without the expense of adding 2 additional...
P0626K - TAKE APART HINGE - black.
$4.90
Take-apart Hinge For Hinged Lids That You May Want To Remove - This large take-apart hinge may be utilized in place of our continuous hinge in order to create a hinged lift-off lid without the...
1908 - 8" STRAP HINGE WITH C/S HOLES
$6.80
Strap Hinges are used for creating hinged panels for constructing and accessing inside of the crate, as well as diassembling crates for flat storage.
P1327K - HINGE - black.
$4.40
Hinge For Hinged Lids - This hinge easily creates hinge lids for your caseRivets Required For Installation: 6Depending on your case design and dimensions, some rivets may require backing washers...