Description
Strap Hinges are used for creating hinged panels for constructing and accessing inside of the crate, as well as diassembling crates for flat storage.
Related Products


2698 - PADLOCKABLE STRAP HINGE
MSRP:
Now:
$4.90
Was:
Padlockable Strap Hinge is used for creating hinged panels for accessing inside of the crate. This model may be used in conjunction with a padlock to secure the crate contents.


1904 - 4" STRAP HINGE
MSRP:
Now:
$2.60
Was:
Strap Hinges are used for creating hinged panels for constructing and accessing inside of the crate, as well as diassembling crates for flat storage.


1908 - 8" STRAP HINGE
MSRP:
Now:
$7.20
Was:
Strap Hinges are used for creating hinged panels for constructing and accessing inside of the crate, as well as diassembling crates for flat storage.


P1327 - PRE PUNCHED - 3" long hinge
MSRP:
Now:
$3.90
Was:
Hinge For Hinged Lids - This hinge easily creates hinge lids for your case. Rivets Required For Installation: 6Depending on your case design and dimensions, some rivets may require backing...


P1327K - HINGE - black
MSRP:
Now:
$4.40
Was:
Hinge For Hinged Lids - This hinge easily creates hinge lids for your caseRivets Required For Installation: 6Depending on your case design and dimensions, some rivets may require backing washers...
Customers Also Viewed


1906 - 6" STRAP HING
MSRP:
Now:
$4.90
Was:
Strap Hinges are used for creating hinged panels for constructing and accessing inside of the crate, as well as diassembling crates for flat storage.


1904 - 4" STRAP HINGE
MSRP:
Now:
$2.60
Was:
Strap Hinges are used for creating hinged panels for constructing and accessing inside of the crate, as well as diassembling crates for flat storage.


1908 - 8" STRAP HINGE
MSRP:
Now:
$7.20
Was:
Strap Hinges are used for creating hinged panels for constructing and accessing inside of the crate, as well as diassembling crates for flat storage.


E0825 - HYBRID TONGUE AND GROOVE - 3/8" (6.5 ft.)
MSRP:
Now:
$14.90
Was:
Hybrid Tongue & Groove Extrusion - Mates with itself. Operates on a “mirror image” concept, almost like two W’s coming together when the lid closes. This not only...


1000 - LARGE HEAVY DUTY BALL CORNER WITH 1.26" OFFSETS
MSRP:
Now:
$1.80
Was:
Heavy Duty Steel Ball Corner With Offset For Extrusions. Mates with all of our extrusions for 1/4", 3/8", and 1/2" wall panel thicknesses. Provides for the most professional flush and...


1014 - BALL CORNER - DE LUX - stackable
MSRP:
Now:
$2.30
Was:
Heavy Duty Steel Ball Corner With Offset For Extrusions And Stacking Dimple. Mates with all of our extrusions for 1/4", 3/8", and 1/2" wall panel thicknesses. Covers the joint and...


6690 - POP RIVET - 3/8" & 1/2" WALL
MSRP:
Now:
$0.10
Was:
Smooth Rivets with Aluminium Body and Steel Mandrel
Diameter 4.8mm / 3/16"
Length 20.6mm / 13/16"
Grip range 12.7mm / 1/2" - 15.9mm / 5/8"Backing Washers...


3103 - 3/8" GROOVE EXTRUSION (12 ft. cut in half)
MSRP:
Now:
$25.40
Was:
Heavy Duty Tongue Extrusion. Mates with our 3100 Tongue Extrusions to create lid closures.NOTE: Mill finish unanodized extrusions can commonly incur surface abrasions during shipment from...


1002 - BALL CORNER - large
MSRP:
Now:
$1.80
Was:
Heavy Duty Steel Ball Corner. Mates with all of our extrusions for 1/4", 3/8", and 1/2" wall panel thicknesses. Covers the joint and seams between the extrusions at all corners...

6010 - 5/16" T-NUT - ATTACHES CASTERS & CASTER BOARDS use S51618 bolt)
MSRP:
Now:
$0.25
Was:
T-Nut - Used for mounting casters to caster board and caster boards to case bottoms. You should have equal amounts of T-Nuts and Hex Bolts. (see info & graphics below) USE...