- Home
- ALUMINUM FRAMEWORK
- 1/2" Wall Extrusions
- 3270 - U CHANNEL 1/2" GAP EXTRUSION - (12 ft. Cut in half)
3270 - U CHANNEL 1/2" GAP EXTRUSION - (12 ft. Cut in half)
- SKU:
- 3270
- UPC:
- MPN:
- Weight:
- 0.98 LBS
- Width:
- 0.54 (in)
- Height:
- 0.80 (in)
- Depth:
- 72.00 (in)
- Shipping:
- Calculated at Checkout
MSRP:
Now:
$22.90
Was:
— You save
Description
U-Channel 12 foot CUT in half making it 72 inches for shipping
Board thickness: 12.7mm / 1/2"
TO BE USED WITH RAW PLYWOOD
Material: Aluminium 6063-T5
Related Products


3272 - U CHANNEL EXTRUSION 3/8" (12 ft. Cut in half)
MSRP:
Now:
$22.40
Was:
U-Cap Edge Trim Extrusion. Used to cover (trim) bare edges of wood panels.NOTE: Mill finish unanodized extrusions can commonly incur surface abrasions during shipment from rubbing together...


3053 - 1/4" DOUBLE ANGLE EXTRUSION (12 ft. Cut in half)
MSRP:
Now:
$43.40
Was:
Double Angle Extrusion· 29mm x 29mm / 1 1/8" x 1 1/8"· Board thickness: 6.8mm / 1/4"· Equal inside legs for stronger construction
Double channels not only make assembly faster and easier, but...


3020 - 1/4" EXTRUSION - MALE (12 ft. Cut in Half)
MSRP:
Now:
$22.50
Was:
Heavy Duty Tongue Extrusion. Mates with our 3022 Groove Extrusions to create lid closures.NOTE: Mill finish unanodized ext


3022 - 1/4" FEMALE EXTRUSION (12 ft. Cut in Half)
MSRP:
Now:
$24.40
Was:
Heavy Duty Groove Extrusion. Mates with our 3020 Tongue Extrusions to create lid closures.NOTE: Mill finish unanodized ext


3030 1/2" TONGUE EXTRUSION (12 ft. Cut In Half)
MSRP:
Now:
$22.70
Was:
THIS ITEM SELLS IN 12 FT. STICKS & MUST SHIP CUT FOR GROUND SHIPPING. IF YOU REQUIRE THE STICKS UNCUT FOR YOUR PROJECT, ADDITIONAL SUBSTANTIAL COST WILL BE REQUIRED FOR FREIGHT...
Customers Also Viewed


E0876 - DOUBLE ANGLE - 1/2" CORNER EXTRUSION (6.5ft.)
MSRP:
Now:
$24.80
Was:
Double Angle Extrusion· 30mm x 30mm / 1.18" x 1.18"· Board thickness : 13mm / 1/2"
Material: Aluminium 6063-T5
Double Angle Corner Extrusion. Double channels not...


E0826 - HYBRID TONGUE AND GROOVE - 1/2" (6.5 ft.)
MSRP:
Now:
$14.90
Was:
Hybrid Tongue & Groove Extrusion - Mates with itself. Operates on a “mirror image” concept, almost like two W’s coming together when the lid closes. This not only...

ABS Plastic Sheet / BLACK-** READ DETAILS BELOW**
MSRP:
Now:
$39.80
Was:
ABS Plastic Sheet
**** ABS may incur additional shipping cost with UPS not assessed at the time of order based on UPS's Dimensional Weight policies and calculations. We will contact you...


6690 - POP RIVET - 3/8" & 1/2" WALL
MSRP:
Now:
$0.11
Was:
Smooth Rivets with Aluminium Body and Steel Mandrel
Diameter 4.8mm / 3/16"
Length 20.6mm / 13/16"
Grip range 12.7mm / 1/2" - 15.9mm / 5/8"Backing Washers...


3023 - 1/2" DOUBLE ANGLE CORNER EXTRUSION (12 ft. Cut In Half)
MSRP:
Now:
$41.10
Was:
Double Angle Extrusion· 35mm x 35mm / 1.38" x 1.38"· Board thickness : 13.5mm / 9/16"
Material: Aluminium 6063-T5
Heavy Duty Double Angle Corner Extrusion. Double...


FW18/18B - QUICK CLAMP BRACE SET FOR 1/2" 3024 & 3025 EXTRUSIONS " Panels Must use matching tongue and groove read description below
MSRP:
Now:
$8.90
Was:
Heavy duty die-cast corner braces with new QuickClamp™ interlocking system - These interlocking corner braces create a seamless transition between the tongue and groove extrusion and the...


3030/32 - 1/2 " BREAK APART TONGUE & GROOVE EXTRUSION (12 ft Cut In Half)
MSRP:
Now:
$44.00
Was:
Break-Apart Tongue & Groove ExtrusionBoard Thickness: 14.5mm / 9/16"Fits Most Domestic Laminates.
Material: Aluminium 6063-T5
THIS ITEM SELLS IN 12 FT. STICKS & MUST SHIP CUT In...


6700 - EXTRA LONG "POP" RIVET
MSRP:
Now:
$0.12
Was:
Smooth Rivets with Aluminium Body and Steel Mandrel
Diameter 4.8mm / 3/16"
Length 24mm / 15/16"
Grip range 15.9mm / 5/8" - 19mm / 3/4"Backing Washers...


B1123 - CORNER BRACE - DELUXE - offset
MSRP:
Now:
$1.40
Was:
Heavy Duty Steel Corner Brace With Offset For Extrusions. Mates with all of our standard double angle corner & hybrid extrusions for 1/4", 3/8", and 1/2" wall panel thicknesses.. Provides...


S1148 - RIVET BACKING WASHER
MSRP:
Now:
$0.09
Was:
Backing Washer For Our Rivets - May be used in conjunction with all of our rivets. Creates a strong internal backing for maximum holding strength. Used when rivets install with bare wood...