Handle / Standard / Recessed
- In Stock
- 1.20 LBS
- 6.25 (in)
- 4.50 (in)
- 0.50 (in)
- Calculated at Checkout
Standard heavy-duty recessed handle. This is a one-piece spring-loaded assembly that allows for comfortable carrying of cases.
ASSOCIATED COMPATIBLE PARTS:
Rivets Required For Installation: 10
Rivet Protected Recessed Handle
150kg/330.69lb carrying capacity.
THIS ITEM REQUIRES A CUTOUT IN THE CASE WALL TO INSTALL.
Material: 1.2mm / 0.047" Steel
May Use Backplate:
Part # CNSH1906
See Product Pictures Above
This is the second box I've built, and I love these handles. My boxes are big and heavy - 4'x3'x1.5', 150#. These handles work, and snap out of the way when you let go. Perfect.
Sturdy handle with a strong spring that will keep it flush when not in use. I'm buying another set right now.
These handles were a good indicator that the roadcase I made for my amp were legit. Bandmates are very jealous.
Everyone knows Penn-Elcom manufactures the best case hardware. We all look to purchase their hardware at the best price. However, SERVICE, both before, during and after the sale is so important in this day and age of "I did it all on the internet." You might be able to find this handle for a few cents cheaper elsewhere, but you won't find better customer service than right here on DIY Roadcases. That said, I highly recommend also purchasing the backplate for this handle. Yeah, I know; you need four handles for your flightcase and getting four backplates will cost you a whole $7.00 vs. just using backing washers. Think about this: The backplates are a solid piece of 1/8" aluminum. The strength they provide to these handles vs. just using washers is immense. One solid piece vs. a bunch of washers. Really, washers would work OK, but a buck and change for the 100% solution vs. $.30 for the .50% solution...unless you're buiding 302 cases at a time, there's really no discussion necessary!
I am very pleased with the quality and function of this product.