P1980K-Strut Hinge Black ( Picture Shows Nickel-Part Is Black)
- SKU:
- P1980K
- UPC:
- MPN:
- Weight:
- 0.11 LBS
- Width:
- 1.46 (in)
- Height:
- 0.12 (in)
- Depth:
- 3.38 (in)
- Shipping:
- Calculated at Checkout
MSRP:
Now:
$3.20
Was:
— You save
Related Products


P1980N - STRUT HINGE STAY - SURFACE.
MSRP:
Now:
$2.50
Was:
Small Strut Hinge Lid Stay - This surface-mount lid stay has a built-in hinge. May be used as a stand-alone hinge (in pairs, or three at a time) on small cases in place of a standard hinge...


P1327K - HINGE - black.
MSRP:
Now:
$4.40
Was:
Hinge For Hinged Lids - This hinge easily creates hinge lids for your caseRivets Required For Installation: 6Depending on your case design and dimensions, some rivets may require backing washers...


P1990K - STRUT HINGE / STAY - black
MSRP:
Now:
$3.30
Was:
Small Strut Hinge Lid Stay - This surface-mount lid stay has a built-in hinge. May be used as a stand-alone hinge (in pairs, or three at a time) on small cases in place of a standard hinge...


P1327K - HINGE - black
MSRP:
Now:
$4.40
Was:
Hinge For Hinged Lids - This hinge easily creates hinge lids for your caseRivets Required For Installation: 6Depending on your case design and dimensions, some rivets may require backing washers...


L1094K-HD - DRAW LATCH - BLACK Locking (note - picture is nickel-product is black)
MSRP:
Now:
$6.40
Was:
This is a standard draw latch. This is a two-piece surface-mount latch and is key-lockable BLACK coatedRivets Required For Installation: 5 OUR RIVETS DO NOT FIT THESE HOLES - SMALLER...
Customers Also Viewed


P1980N - STRUT HINGE STAY - SURFACE.
MSRP:
Now:
$2.50
Was:
Small Strut Hinge Lid Stay - This surface-mount lid stay has a built-in hinge. May be used as a stand-alone hinge (in pairs, or three at a time) on small cases in place of a standard hinge...


P1990K - STRUT HINGE / STAY - black
MSRP:
Now:
$3.30
Was:
Small Strut Hinge Lid Stay - This surface-mount lid stay has a built-in hinge. May be used as a stand-alone hinge (in pairs, or three at a time) on small cases in place of a standard hinge...


P1993Z - STRUT HINGE STAY - SURFACE - medium
MSRP:
Now:
$3.10
Was:
Small Strut Hinge Lid Stay - This surface-mount lid stay has a built-in hinge. May be used as a stand-alone hinge (in pairs, or three at a time) on small cases in place of a standard hinge...


6690 - POP RIVET - 3/8" & 1/2" WALL
MSRP:
Now:
$0.10
Was:
Smooth Rivets with Aluminium Body and Steel Mandrel
Diameter 4.8mm / 3/16"
Length 20.6mm / 13/16"
Grip range 12.7mm / 1/2" - 15.9mm / 5/8"Backing Washers...


S1148 - RIVET BACKING WASHER
MSRP:
Now:
$0.09
Was:
Backing Washer For Our Rivets - May be used in conjunction with all of our rivets. Creates a strong internal backing for maximum holding strength. Used when rivets install with bare wood...


B1123 - CORNER BRACE - DELUXE - offset
MSRP:
Now:
$1.20
Was:
Heavy Duty Steel Corner Brace With Offset For Extrusions. Mates with all of our standard double angle corner & hybrid extrusions for 1/4", 3/8", and 1/2" wall panel thicknesses.. Provides...


L1094K-HD - DRAW LATCH - BLACK Locking (note - picture is nickel-product is black)
MSRP:
Now:
$6.40
Was:
This is a standard draw latch. This is a two-piece surface-mount latch and is key-lockable BLACK coatedRivets Required For Installation: 5 OUR RIVETS DO NOT FIT THESE HOLES - SMALLER...


6700 - EXTRA LONG "POP" RIVET
MSRP:
Now:
$0.11
Was:
Smooth Rivets with Aluminium Body and Steel Mandrel
Diameter 4.8mm / 3/16"
Length 24mm / 15/16"
Grip range 15.9mm / 5/8" - 19mm / 3/4"Backing Washers...


E0875 - DOUBLE ANGLE CORNER EXTRUSION -3/8" (6.5 ft.)
MSRP:
Now:
$34.80
Was:
Double Angle Corner Extrusion. Double channels not only make assembly faster and easier, but provide maximum strength and integrity for case framework. See our cutting tips video...


X300010S - FLIGHT PANEL -Heavy Duty - 3/8"
MSRP:
Now:
$149.80
Was:
Heavy Duty FLight Panel™
Light Weight Polypropylene Board with Smooth Finish
45 % less weight than plywood with a laminate
Thickness: 3/8"Sheet size: 91" x 63"