Corner Brace - Medium

(1 review) Write a Review
SKU:
CNS1220BK
Availability:
In Stock
Weight:
0.03 LBS
Width:
1.50 (in)
Height:
0.94 (in)
Depth:
1.50 (in)
Shipping:
Calculated at Checkout
  • Corner Brace - Medium
  • Corner Brace - Medium
  • Corner Brace - Medium
$0.50

Description

Medium Steel Corner Brace In Black Finish - Covers gaps and seams between the tongue & groove and corner extrusions.

Rivets Required For Installation: 4  OUR RIVETS DO NOT FIT THESE HOLES - EITHER DRILL THE HOLES OUT WITH YOUR 3/16" DRILL BIT OR SMALLER RIVETS MUST BE PURCHASED AT YOUR LOCAL HARDWARE STORE.

Depending on your case design and dimensions, some rivets may require backing washers. Some rivets will install through the aluminum extrusions and therefore require no backing washers.

THIS ITEM REQUIRES NO CUTOUTS IN THE CASE WALL TO INSTALL.

RECOMMENDED USES:
Smaller Profile Cases

MINIMUM RECOMMENDED CASE DIMENSIONS:
N/A

EXAMPLES
- All Cases

ASSOCIATED COMPATIBLE PARTS:
- All Of Our Extrusions

Material: 1.2mm/ 0.047" Steel

View AllClose

Additional Information

Specifications Drawings:
See Parts Pictures Above
View AllClose

1 Review

  • 5
    works as is should

    Posted by Justin on 6th May 2013

    these look great and work as they should. they do not completely cover the hybrid tongue and groove extrusion, however that is a just a side note as that can be seen just by looking at the measurements provided in the pictures. works as it should.

View AllClose