3053 - 1/4" DOUBLE ANGLE EXTRUSION (12 ft. Cut in half)
- In Stock
- 3.20 LBS
- 1.19 (in)
- 144.00 (in)
- 1.19 (in)
- Calculated at Checkout
Double Angle Extrusion
· 29mm x 29mm / 1 1/8" x 1 1/8"
· Board thickness: 6.8mm / 1/4"
· Equal inside legs for stronger construction
Double channels not only make assembly faster and easier, but provide maximum strength and integrity for case framework. See our cutting tips video tutorial
NOTE: Mill finish unanodized extrusions can commonly incur surface abrasions during shipment from rubbing together if they incur harsh handling during the shipment process. This is not abnormal, and is easy to remedy by rubbing the extrusions with some #0000 Fine Grade Steel Wool, cheaply available at any hardware store.
THIS ITEM SELLS IN 12 FT. STICKS & MUST SHIP CUT FOR GROUND SHIPPING. IF YOU REQUIRE THE STICKS UNCUT FOR YOUR PROJECT, ADDITIONAL SUBSTANTIAL COST WILL BE REQUIRED FOR FREIGHT SHIPPING.
Rivets Required For Installation: Varies depending on length of section used, as well as associated parts that may be riveted through it.
Depending on your case design some rivets may require backing washers. Most rivets will install through the interior leg of the extrusion and therefore require no backing washers.
Material: Mill Finished Aluminum
See Parts Pictures Above