3175 TB - 3" HEAVY DUTY CASTER W BRAKE - 350 # capacity
- SKU:
- 3175TB
- UPC:
- MPN:
- Weight:
- 2.25 LBS
- Width:
- 3.62 (in)
- Height:
- 2.50 (in)
- Depth:
- 5.20 (in)
- Shipping:
- Calculated at Checkout
MSRP:
Now:
$18.70
Was:
— You save
Description
4" Swivel Castor with #2 top plate.
1.26" Wide Grey On Grey Rubber Wheel.
Ball Bearing Swivel Raceway.
Load Capacity: 349.98lb
Related Products


3175 - 4" HEAVY DUTY SWIVEL CASTER - 350 # capacity
MSRP:
Now:
$14.80
Was:
4" Swivel Castor with #2 top plate.
1.26" Wide Grey On Grey Rubber Wheel.Ball Bearing Swivel Raceway.Load Capacity: 349.98lb


8408HD - EXTRA HEAVY DUTY CASTER - 4" - SWIVEL - no brake
MSRP:
Now:
$19.80
Was:
Xtra Heavy duty swivel caster for rigorous application. 2" wide wheel for large cases with large weight capacities that prevent easy carrying. Utilizes heavy-duty double-row...


8408HDWB -EXTRA HEAVY DUTY CASTER 4" swivel + brake
MSRP:
Now:
$25.60
Was:
Xtra Heavy duty swivel caster for rigorous application. 2" wide wheel for large cases with large weight capacities that prevent easy carrying. Utilizes heavy-duty double-row...


W0990/80 - CASTER / 3" (80mm) / SWIVEL - no brake
MSRP:
Now:
$9.80
Was:
W0990/80 Swivel castor with blue wheel
Light case castors are secured to the bottom of the case to make it easier to maneuver - a must for any large flight case or cases that will...


W2100 - RECESSED EDGE CASTER / heavy duty
MSRP:
Now:
$24.20
Was:
Extra Heavy Duty edge caster for pull-style case applications. 4" wheel 420 lb. capacity for tilt & roll pull-style cases. Requires 2 casters for proper tilt-and-roll...
Customers Also Viewed


3024 - 1/2" EXTRUSION -MALE for use with quick clamps (12 ft. Cut in Half)
MSRP:
Now:
$33.90
Was:
THIS ITEM SELLS IN 12 FT. STICKS & MUST SHIP CUT FOR GROUND SHIPPING. IF YOU REQUIRE THE STICKS UNCUT FOR YOUR PROJECT, ADDITIONAL SUBSTANTIAL COST WILL BE REQUIRED FOR FREIGHT...


S1148 - RIVET BACKING WASHER
MSRP:
Now:
$0.09
Was:
Backing Washer For Our Rivets - May be used in conjunction with all of our rivets. Creates a strong internal backing for maximum holding strength. Used when rivets install with bare wood...


3025 - 1/2" EXTRUSION FEMALE for use with quick clamps (12 ft. Cut in Half)
MSRP:
Now:
$39.80
Was:
THIS ITEM SELLS IN 12 FT. STICKS & MUST SHIP CUT FOR GROUND SHIPPING. IF YOU REQUIRE THE STICKS UNCUT FOR YOUR PROJECT, ADDITIONAL SUBSTANTIAL COST WILL BE REQUIRED FOR FREIGHT...


FW18/18B - QUICK CLAMP BRACE SET FOR 1/2" 3024 & 3025 EXTRUSIONS " Panels Must use matching tongue and groove read description below
MSRP:
Now:
$8.90
Was:
Heavy duty die-cast corner braces with new QuickClamp™ interlocking system - These interlocking corner braces create a seamless transition between the tongue and groove extrusion and the...

L925/527 - LATCH - FLOP DOWN - LARGE - recessed with 1 1/16" offsets
MSRP:
Now:
$10.40
Was:
This is a standard heavy-duty twist latch. This is a two-piece dish assembly and requires extra cuts to the tongue & groove, or hybrid, extrusions for installation...


6690 - POP RIVET - 3/8" & 1/2" WALL
MSRP:
Now:
$0.10
Was:
Smooth Rivets with Aluminium Body and Steel Mandrel
Diameter 4.8mm / 3/16"
Length 20.6mm / 13/16"
Grip range 12.7mm / 1/2" - 15.9mm / 5/8"Backing Washers...


H7165Z - LARGE RECESSED HANDLE
MSRP:
Now:
$5.80
Was:
Large heavy-duty recessed handle. This is a one-piece spring-loaded assembly and allows for comfortable carrying of cases. Rivets Required For Installation: 14Utilize backing...


L925/529 - LARGE TWIST LATCH in "Short" 6.25" Dish (With Plain Flanges)
MSRP:
Now:
$9.80
Was:
LARGE TWIST LATCH IN "SHORT" 6.25" DISH FOR CASES WITH LOWER LID APPLICATIONS - PLAIN FLANGES


C1851/30 - LARGE FLAT CORNER with 1.18" offsets / 0.08 radius
MSRP:
Now:
$2.60
Was:
6 Hole Flat Corner with 30mm / 1.18" Offset6 Mounting HolesInternal Radius: 2mm / 0.08"


3175 - 4" HEAVY DUTY SWIVEL CASTER - 350 # capacity
MSRP:
Now:
$14.80
Was:
4" Swivel Castor with #2 top plate.
1.26" Wide Grey On Grey Rubber Wheel.Ball Bearing Swivel Raceway.Load Capacity: 349.98lb