5299-SOCKET TOP PLATE (use with pop in caster 5295)
- SKU:
- 5299
- UPC:
- MPN:
- Weight:
- 0.25 LBS
- Width:
- 2.13 (in)
- Height:
- 1.38 (in)
- Depth:
- 0.59 (in)
- Shipping:
- Calculated at Checkout
MSRP:
Now:
$5.38
Was:
— You save
Related Products

6010 - 5/16" T-NUT - ATTACHES CASTERS & CASTER BOARDS use S51618 bolt)
MSRP:
Now:
$0.25
Was:
T-Nut - Used for mounting casters to caster board and caster boards to case bottoms. You should have equal amounts of T-Nuts and Hex Bolts. (see info & graphics below) USE...


1482 - CONNECTOR / CASTER DISH (use for either)
MSRP:
Now:
$4.20
Was:
Large Recessed Blank Connector Dish - Drill hole and make your own cutouts as needed for whatever connector style you have.Rivets Required For Installation: 6Backing Washers Required...


W0094/NB - CASTER PLATES - REMOVABLE
MSRP:
Now:
$7.40
Was:
Castor Plate to suit Heavy Duty Castors with 78.5mm x 106.5mm x 4mm / 3.09" x 4.19" x 3/16" Top Plates.(Castor not included)Fits...


5295 - 2" POP IN CASTER (use with top plate 5299)
MSRP:
Now:
$5.39
Was:
2" POP IN CASTER FOR SMALL CABINETS AND FLIGHT CASES - USE TOP PLATE 5299


W0093/NB - CASTER PLATE - REMOVABLE
MSRP:
Now:
$7.40
Was:
Castor Plate to suit European Castors with 3.11" x 4.09" x 1/8" Top PlatesFits Castors W0990/80 AND W0985/80 Retro Fit - Same Mounting Hole Configuration as Castor.(Cas
Customers Also Viewed


5295 - 2" POP IN CASTER (use with top plate 5299)
MSRP:
Now:
$5.39
Was:
2" POP IN CASTER FOR SMALL CABINETS AND FLIGHT CASES - USE TOP PLATE 5299


W0094/NB - CASTER PLATES - REMOVABLE
MSRP:
Now:
$7.40
Was:
Castor Plate to suit Heavy Duty Castors with 78.5mm x 106.5mm x 4mm / 3.09" x 4.19" x 3/16" Top Plates.(Castor not included)Fits...


W8992 - 5" BLUE WHEEL CASTER
MSRP:
Now:
$16.30
Was:
5" HEAVY DUTY CASTER - 390 POUND LOAD CAPACITY PER WHEEL


W0098CZ - INTERNAL CASTER MOUNTING PLATE - For 3/8X16 bolts (not included)
MSRP:
Now:
$5.20
Was:
Steel Plate with 4 integrated 3/8-16UNC threads to mount castors with #2 top plates.With this innovative new castor plate there is no longer a need for the use of t-nuts, significantly reducing...

W8675-W/PJP/BK RECESSED CORNER CASTER - wheel only
MSRP:
Now:
$8.20
Was:
Replacement Wheel for Heavy duty corner caster for pull-style case applications. 3" wheel 330 lb capacity for tilt & roll pull-style cases. Fits on either side of the case (so there is...

6010 - 5/16" T-NUT - ATTACHES CASTERS & CASTER BOARDS use S51618 bolt)
MSRP:
Now:
$0.25
Was:
T-Nut - Used for mounting casters to caster board and caster boards to case bottoms. You should have equal amounts of T-Nuts and Hex Bolts. (see info & graphics below) USE...


W0985/80 - Caster / 3" (80mm) / SWIVEL with full locking brake
MSRP:
Now:
$11.90
Was:
W0990/80 Swivel castor with blue wheel
Light case castors are secured to the bottom of the case to make it easier to maneuver - a must for any large flight case or cases that will...


1482 - CONNECTOR / CASTER DISH (use for either)
MSRP:
Now:
$4.20
Was:
Large Recessed Blank Connector Dish - Drill hole and make your own cutouts as needed for whatever connector style you have.Rivets Required For Installation: 6Backing Washers Required...


2000BK+2007BK LATCH & CATCH PLATE -VALANCE SPANNING -recessed
MSRP:
Now:
$15.40
Was:
This latch "spans" the tongue & groove closure valance. This requires no extra cuts to the tongue & groove, or hybrid, extrusions. This simplifies the installation process and adds...

W0962Z - CASTER DISH - EXTRA LARGE - DEEP RECESS - 4" & 5" CASTERS
MSRP:
Now:
$5.80
Was:
Heavy Duty Xtra Large Caster Dish - Catser dishes install into the top of like-size cases that are equipped with casters, and also have the need to be stacked. Caster dishes hold cases in...