C1349Z - BRACE / BALL CORNER - heavy duty
- SKU:
- C1349Z
- Availability:
- In Stock
- Weight:
- 0.17 LBS
- Width:
- 2.00 (in)
- Height:
- 1.80 (in)
- Depth:
- 2.00 (in)
- Shipping:
- Calculated at Checkout
Description
Steel Brace Ball Corner. Heavy duty ball corner with corner brace built-in for thin profile lids, or to be used with lid-maker extrusions. Covers the joint and seams between the extrusions at all corners, as well as covering hybrid tongue & groove extrusion without the need for any corner brace.
Rivets Required For Installation: 3
Depending on your case design and dimensions, some rivets may require backing washers. Some rivets will install through the aluminum extrusions and therefore require no backing washers.
THIS ITEM REQUIRES NO CUTOUTS IN THE CASE WALL TO INSTALL.
RECOMMENDED USES:
Cases with thin lid profiles
MINIMUM RECOMMENDED CASE DIMENSIONS:
N/A
EXAMPLES
- All Cases
ASSOCIATED COMPATIBLE PARTS:
- All Of Our Extrusions
- E0870 Lid-maker Extrusion
Material: 1.5mm/ 0.059" Steel
Additional Information
Specifications Drawings: |
See Parts Pictures Above |
Mates With: |
CNSE0870 Lid-maker Extrusion |
Related Products
C1375Z - LARGE HEAVY DUTY BALL CORNER
C1992Z - HEAVY DUTY BALL CORNER with 1.18" offsets
C1358Z - BRACE BALL CORNER
C1373 - BRACE BALL CORNER - large
