Steel Ball Corner - Can be used on all corners, but is the perfect match for the bottom case corners when using the C1358Z on the 4 lid corners with our lidmaker extrusion, or on any case that utilizes the Brace Ball Corner on the lid. This corner may also be used as a stand-alone corner on all case styles. Smaller profile. Covers the joint and seams between the extrusions at all corners.
Rivets Required For Installation: 3
Depending on your case design and dimensions, some rivets may require backing washers. Some rivets will install through the aluminum extrusions and therefore require no backing washers.
THIS ITEM REQUIRES NO CUTOUTS IN THE CASE WALL TO INSTALL.
- Cases made with our Lidmaker Extrusion
- All case styles
Material: 1.5mm/ 0.059" Steel
See Parts Pictures Above