D0944K-RECESSED DISH-STEEL-PUNCHED FOR 1 @ 1/4" JACK
- SKU:
- D0944K
- UPC:
- MPN:
- Weight:
- 0.24 LBS
- Width:
- 4.41 (in)
- Height:
- 4.02 (in)
- Depth:
- 0.50 (in)
- Shipping:
- Calculated at Checkout
MSRP:
Now:
$4.90
Was:
— You save
Related Products


L944/527MOL3 - LARGE RECESSED LATCH IN DISH - 1 1/16" OFFSETS
MSRP:
Now:
$10.60
Was:
This is a standard heavy-duty twist latch. This is a two-piece dish assembly and requires extra cuts to the tongue & groove, or hybrid, extrusions for installation...


D0604K - CONNECTER DISH - punched for neutrik D series
MSRP:
Now:
$4.90
Was:
Recessed Pre-punched Connector Dish - pre-punched for Nuetrik D-series connectors (XLR, Speaon, RK45, etc.).Rivets Required For Installation: 4THIS ITEM REQUIRES A CUTOUT IN THE CASE WALL...


M1500-PLASTIC DISH-for 2 @ 1/4" jacks
MSRP:
Now:
$1.70
Was:
ABS PLASTIC DISH PUNCHED FOIR 2 @ 1/4" JACKS


D0607K-RECESSED STEEL DISH-punched for 2 @ 1/4" jacks
MSRP:
Now:
$4.90
Was:
RECESSED STEEL DISH-PUNCHED FOR 2 @ 1/4" JACKS. BLACK POWDER COATED


D0602K-RECESSED STEEL DISH-punched for 2 Neutrik D series +2 @ 1/4" jacks
MSRP:
Now:
$6.40
Was:
RECESSED STEEL POWDER COATED DISH - PUNCHED FOR 2 NEUTRIK D SERIES + 2 @ 1/4" JACKS
Customers Also Viewed


6660 - POP RIVET - 1/4" CASE WALL
MSRP:
Now:
$0.10
Was:
1/4" Case Wall Rivet - May be used in conjunction with parts and extrusions associated with the construction of cases with 1/4" walls.May be installed with pneumatic rivet gun or manual hand...


M1500-PLASTIC DISH-for 2 @ 1/4" jacks
MSRP:
Now:
$1.70
Was:
ABS PLASTIC DISH PUNCHED FOIR 2 @ 1/4" JACKS

M885010BK/BL - FLIGHT PANEL 2 - 3/8" - BLACK - BLUE **NEEDS FREIGHT COST ON BOTH FULL SIZE OR CUT PANELS **
MSRP:
Now:
$108.00
Was:
BLACK ONE SIDE - BLUE ON THE OTHER
The lightest, strongest, and most economical panel in the market. A perfect and environmentally friendly alternative to ABS and PVC laminates on...


D0941K-RECTANGULAR RECESSED DISH - powder coated black
MSRP:
Now:
$5.20
Was:
MEDIUM RECTANGULAR BLACK POWDER COATED STEEL DISH - TO ALLOW YOU TO CARRY OUT YOUR OWN PUNCH AND DRILLING CONFIGURATIONS

M885013 - FLIGHT PANEL 2 - 1/2" - BLACK/BLACK ** NEEDS FREIGHT COST ON BOTH FULL SIZE OR CUT PANELS **
MSRP:
Now:
$118.00
Was:
BLACK ON BOTH SIDES
The lightest, strongest, and most economical panel in the market. A perfect and environmentally friendly alternative to ABS and PVC laminates on wood at an...


D0607K-RECESSED STEEL DISH-punched for 2 @ 1/4" jacks
MSRP:
Now:
$4.90
Was:
RECESSED STEEL DISH-PUNCHED FOR 2 @ 1/4" JACKS. BLACK POWDER COATED

C1341-30/-33Z - LARGE HEAVY DUTY BALL CORNER WITH 1.38" OFFSETS
MSRP:
Now:
$2.50
Was:
LARGE HEAVY DUTY BALL CORNER WITH 1.38" OFFSETS


C1992Z/01 - HEAVY DUTY BALL CORNER with dimple and 1 1/8" offsets
MSRP:
Now:
$2.70
Was:
Large Heavy Duty Ball Corner with 30mm / 1.18" Offset
With stacking dimple6 Mounting HolesInternal Radius: 4mm / 3/16"


H1025 - EDGE HANDLE -RECESSED-tight radius for over angle
MSRP:
Now:
$11.40
Was:
Standard heavy-duty recessed edge handle. This is a one-piece assembly that may be installed on speaker cabinets as well as cases and allows for comfortable carrying...


FW15/15B - QUICK CLAMP BRACE SET - MUST USE EXTRUSIONS 3100 & 3103 (read description below)
MSRP:
Now:
$8.90
Was:
Heavy duty die-cast corner braces with new QuickClamp™ interlocking system - These interlocking corner braces create a seamless transition between the tongue and groove extrusion and the...