Foam & Carpet Spray Adhesive
- In Stock
- 1.50 LBS
- 4.00 (in)
- 12.00 (in)
- 4.00 (in)
- Calculated at Checkout
Foam, Carpet & Vinyl Spray Adhesive - A portable versatile solution for bonding foam, carpet, vinyl and various other materials to a variety of substrates. Strong bonding - Fast tack - Fast drying. Adjustable spray pattern, Non-chlorinated.
NOT TO BE USED FOR LAMINATING ABS PLASTIC TO WOOD!! - SEE OUR LAMINATING ADHESIVE HERE
NOTE: This item may only ship via Ground - No Overnight or 2nd-Day Air Shipments
Our adhesive sprays will cover a total of approximately 60 - 64 sq. ft. depending on on heavy you spray, or how much overlap occurs in your spray pattern. This would cover coating two 4 ft. x 8 ft. surfaces, such as a sheet of plywood and a sheet of our ABS, or a sheet of plywood and enough foam to cover it.
Having said that, please keep in mind that you do not need to saturate the surfaces. A nice even thin coating on both surfaces works just fine. Also, be sure to minimize the overlap area with each pass as you spray, as too much overlap will use up your adhesive faster. Also, keep the can moving as you spray, as lingering too long in any given area(s) will also use up more adhesive.
Installation of foam
ASSOCIATED COMPATIBLE PARTS:
- All foams
500ml / 17oz Can
See Parts Pictures Above
Don't be afraid to apply it heavily. I recommend putting a flat surface on your foam with some weight on it to get a good solid bond.
Don't be fooled by any other inferior product! As my wife would say, "trust me" just by this product & be happy.
One can covered 40 square feet of foam/case interior. This glue seems to have been specifically designed for foam vs. a standard "all in one" spray glue like 3M77. This stuff works very well. Be sure of your foam placement b/c once you lay the foam down, it's permanent!
So far, this adhesive has held up well. I will reserve that 5th star until after the summer when I find out how well it deals with summer heat and sitting in a parked trailer all day.
The spray nozzle wasn't installed on the can. I feel like I wasted a quarter of the stuff trying to get the nozzle installed. So now the top of the can is covered in adhesive.
The adhesive itself works great 5 stars there. But if thats the way the cans are shipped I won't be buying anymore.
:::::::::::::::::::: DIY Road Cases® Response :::::::::::::::::::::::::::::
I apologize for this Mark. I have never seen this before. The nozzle must have gotten jarred loose somewhere along the way, or was defective from the factory. I am sending you a new can at no charge.
Director of Sales & Merchandising
DIY Road Cases®