Laminating Spray Adhesive - Used to laminate our exterior laminates to wood. High temperature resistant. Strong secure bond. BE SURE AND CAREFULLY FOLLOW OUR LAMINATING TUTORIAL PDF & VIDEO! (SEEN HERE)
- If used properly (not over-saturating your plywood or laminate) one can will laminate one 4 x 8 sheet of ABS to one 4 x 8 sheet of plywood.
NOT TO BE USED FOR LAMINATING FOAM OR CARPET!! - SEE OUR FOAM SPRAY ADHESIVE HERE
NOTE: This item may only ship via Ground - No Overnight or 2nd-Day Air Shipments
Our adhesive sprays will cover a total of approximately 60 - 64 sq. ft. depending on on heavy you spray, or how much overlap occurs in your spray pattern. This would cover coating two 4 ft. x 8 ft. surfaces, such as a sheet of plywood and a sheet of our ABS, or a sheet of plywood and enough foam to cover it.
Having said that, please keep in mind that you do not need to saturate the surfaces. A nice even thin coating on both surfaces works just fine. Also, be sure to minimize the overlap area with each pass as you spray, as too much overlap will use up your adhesive faster. Also, keep the can moving as you spray, as lingering too long in any given area(s) will also use up more adhesive.
Laminating ABS, Fiberglass and Aluminum Stucco To Wood
ASSOCIATED COMPATIBLE PARTS:
- All Laminates
384ml / 13oz
See Parts Pictures Above
The right glue for the job.
1 can = 1 sheet of plywood
This stuff works great. Just keep in mind that one can will laminate 1 sheet of plywood and abs. Don't get stuck having to run to Home Depot five minutes before closing!