null UA-133955397-2

Large Heavy Duty Ball Corner with 32mm / 1.26" Offset

(8 reviews) Write a Review
In Stock
0.27 LBS
2.63 (in)
2.63 (in)
3.00 (in)
Calculated at Checkout
  • Large Heavy Duty Ball Corner with 32mm / 1.26" Offset
  • Large Heavy Duty Ball Corner with 32mm / 1.26" Offset
  • Large Heavy Duty Ball Corner with 32mm / 1.26" Offset


Heavy Duty Steel Ball Corner With Offset For Extrusions. Mates with all of our extrusions for 1/4", 3/8", and 1/2" wall panel thicknesses. Provides for the most professional flush and clean fit with extrusions. Covers the joint and seams between the extrusions at all corners while allowing the shape of the corner to sit flush against the case wall for that professionally crafted look.

Rivets Required For Installation: 6

Depending on your case design and dimensions, some rivets may require backing washers. Some rivets will install through the aluminum extrusions and therefore require no backing washers.


All Of Our Extrusions

Finish: Zinc Finish (unless another option is listed)

Material: 2.0mm/ 0.079" Steel

Large Heavy Duty Ball Corner with 32mm / 1.26" Offset

6 Mounting Holes

Internal Radius: 3mm / 1/8

View AllClose

Additional Information

Specifications Drawings:
See Parts Pictures Above
Mates With:
View AllClose

8 Reviews

  • 5
    Best corners ever used

    Posted by Dj Eddie from on 8th Jun 2016

    Ok I'm going to make a generalized review of all my purchased items to make my road case with the Diy Road Cases products. -Corners: I used to buy my road cases part from other seller and after tried Diy Road Cases corners I saw those corner are nothing compared with these guys products, simply better, heavy duty! -Latches: Well nothing else to say about it because are made well and look sharp, I like it! -Casters: OMG the best caster the (Blue) professional heavy duty casters for less, love it! -Corners Brace: Nice and sharp. -Extrusion Angle and Hybrid Tongue: I have to congrats to the one who invented those Hybrid Tongue because with my last provider Extrusion I had to create a freaking special tool to break it in half to separated both parts and I got fingers scratched, dent on my extrusion finish, simply horrible, now with these DIY Road Cases Extrusion and Hybrid Tongue it's a breeze make my road cases, thank you guys for this invent I like it! -Handles: Very solid and seem to be heavy duty as well, recommended! -Foam and ABS: Well not much to say here but I like it, and they look like good quality material, recommended. -Shipping and Support: Guys I have to make an stop here and say THANK YOU TO THE DIY TEAM from the one who process the order to the guys who prepare and ship the goods because they did such a great job sending me all my parts in time record and I appreciate that a lot because I could finish my project right on time! IF YOU'RE REALLY LOOKING FOR THE BEST AND CHEAP ROAD CASES SUPPLIER THEN YOU JUST FOUND IT! I do recommend DIY Road Cases for your personal or professional projects, I'm not an DIY worker but I'm talking from the bottom of my heart because I feel happy after such as good service and products, I hope this review help you decide where to put you money and nothing better than these guys! Thank you DIY Road Cases, I'll be back for more soon!

  • 5
    Easy to use

    Posted by Jay Imhof on 7th Nov 2015

    Fits well

  • 5
    Really nice finishing touches

    Posted by Jeanne on 17th Jan 2015

    These corners look really great on my case. The attention to detail on the recession around the extrusions make it look really slick!

  • 5
    Nice finishing touch to a quality case

    Posted by Rob Borg on 27th Jan 2014

    Quality heavy duty corners. The offset is week worth the extra few cents.

  • 4

    Posted by Unknown on 17th Dec 2013

    The only issue I have with this product is the necessity for grinding the corner down a bit so the device fits flush. Just a tad more diameter on the ball would solve that problem. Otherwise, it is a quality product. ::::::::::::::::::::: DIY Road Cases® Response ::::::::::::::::::::::::::::: Hi , I am sorry to hear that you experienced some issues. I am not sure what the scenario was with your case, but there is no reason, or need, to modify any of our corners to fit our extrusions when things are installed properly, and extrusions are cut properly at their junctions. Best wishes, Jonathan Beacon Director of Sales & Merchandising DIY Road Cases®

  • 5
    Great Construction

    Posted by Nick Cambron on 25th Jun 2013

    Worked great

  • 5
    Great Product

    Posted by Unknown on 30th Mar 2013

    These ball corners are perfect for my case.

  • 5
    Great product

    Posted by Unknown on 22nd Mar 2013

    These ball corners are great! They look fabulous and really makes the case shine. Durable and looks great.

View AllClose