P1250-05 - RATCHET LID STAYS - 5 STOP - sold in pairs
- In Stock
- 0.10 LBS
- 1.50 (in)
- 9.00 (in)
- 0.04 (in)
- Calculated at Checkout
Adjustable Ratchet Steel Lid Stay - Safe Working Load 80kg/176.37lb
Installs to the lid and body on either side of a case interior to prevent the lid from flopping over backwards when open. May also be used to create tilting laptop holders or small mixer holders.
Installation: Nuts & Bolts / 2 per stay / would need 4 total if installing a pair
THIS ITEM REQUIRES TWO DRILLED INSTALLATION HOLES (4 TOTAL FOR THE PAIR) IN THE CASE WALL TO INSTALL.
Medium - Large Sie Cases With Hinged Lids
MINIMUM RECOMMENDED CASE DIMENSIONS:
- All Cases Requiring Hinged Lids
ASSOCIATED COMPATIBLE PARTS:
- All Of Our Hybrid Tongue & Groove Extrusions
Material: Steel / Nickel Plated
See Parts Pictures Above
This works well for holding a lid open at various positions. But keep in mind it won't work when the lid passes 90 degrees, because the weight of the lid will then push upward on the ratchets. Think, do you really need the lid at more than one position? If not, you could probably DIY something cheaper and lightweight. This thing is pretty heavy.