P1980N - STRUT HINGE STAY - SURFACE.
- 0.25 LBS
- 2.00 (in)
- 4.00 (in)
- 0.40 (in)
- Calculated at Checkout
Small Strut Hinge Lid Stay - This surface-mount lid stay has a built-in hinge. May be used as a stand-alone hinge (in pairs, or three at a time) on small cases in place of a standard hinge or continuous hinge. Or it may be used in conjunction with a continuous hinge on medium-size cases. Either way, the built-in lid stay eliminates the need for any other lid stays to prevent the lid from flopping over backwards when open.
Rivets Required For Installation: 8
See our FlexiCase™ Design Tool and video tutorials to help you with this concept and installation.
Backing washers are recommended for mounting holes that do not share the Hybrid Tongue & Groove Extrusion..
THIS ITEM REQUIRES NO CUTOUTS FOR INSTALLATION.
All Cases With Hinged Lids
MINIMUM RECOMMENDED CASE DIMENSIONS:
- All Small To Medium Size Cases Requiring Hinged Lids
ASSOCIATED COMPATIBLE PARTS:
- All Of Our Hybrid Tongue & Groove Extrusions
Material: 1.0mm / 0.39 Steel
See Parts Pictures Above
I used them on a 29"w 1/4" thick wall project. DYI recommended that I add some continuous hinge in between these to add strength, but only because of the thin wall. They work perfectly together. I'm not sure it was really needed, but I took the advice and I'm happy the way it turned out. The stay is just what I needed for an instrument case.
Very durable hnges. Nice to be able to get good quailty products.
Works great no more sprung and pulled out hinges.