Speaker Cabinet Accessories

Large Medium-duty Steel Flat Corner In Black Finish - Smaller profile. Covers the joint and seams between the extrusions at all corners.Rivets Required For Installation: 6  OUR RIVETS DO NOT FIT THESE HOLES -...

Indoor/Outdoor Synthetic Carpet - Used for lining case interiors and speaker cabinet exteriors. I'm not sure how many people have ever used this for pedal board surfaces. However, we did hear from one customer in the past that the pile of this...

Hole Plug For Pre-punched Connector Dishes - Fills blank holes for D-series connectors (XLR, Speaon, RK45, etc.).Material: Plastic

Standard heavy-duty recessed cabinet handle seal. This is a one-piece assembly used for sealing behind routed wooden handles in the sides of speaker cabinets. Traditionally installed with wood screws, or machine screws with nuts,...

Heavy Duty Large Rubber Foot Available In 3 Heights - May be used for any purpose requiring rubber feet on a case, or as a bumber in other applications.  Diameter: 1.57" (40mm)   Available in 3 Heights: 5/8" (15.5mm), 3/4' (19mm)...

Cooling Fan - Low Noise - reduces the heat within cabinets and other closed structures. Rivets, Screws or Bolts Required For Installation: 4RECOMMENDED USES:All CabinetsMINIMUM RECOMMENDED CABINET DIMENSIONS:N/AMaterial:Auminum &...

Heavy duty rubber foot with steel washer. May be used for any purpose requiring rubber feet on a case, or as a bumber in other applications.  Diameter: 1.00" (25.4mm)   Height: 3/8" (10mm)     Medium Rubber Foot...

Large Ribbed 2-Leg Plastic Stacking Corner - Flush mounts to wodden cabinet corners, or over top of carpet-covered cabinets.Screws Required For Installation: 4 (not included)Material: High-impact Plastic

Heavy duty rubber foot with steel washer - Great for case bottoms. May also be used with recessed edge and corner casters to allow them to lay or stand upright without tilting.  Diameter: 1.00" (25.4mm)   Height: 1" (25...

Heavy duty rubber foot with steel washer. May be used for any purpose requiring rubber feet on a case, or as a bumber in other applications.  Diameter: 1.69" (43mm)   Height: 3/4" (19.1mm)     Medium Rubber Foot...

Large Ribbed 2-Leg Plastic Stacking Corner - Flush mounts to wodden cabinet corners, or over top of carpet-covered cabinets.Screws Required For Installation: 4 (not included)Material: High-impact Plastic

Standard heavy-duty designer black rubber surface handle. This handle for more elegant applications is a one-piece assembly that mounts to the exterior case surface without requiring any cutout and allows for...

Heavy duty plastic foot - Great for case bottoms. May also be used with recessed edge and corner casters to allow them to lay or stand upright without tilting.Bolts or Machine Screw With Nut Recommended / Required For...

Our backplates are a great alternative to using backing washers. Backplates save time and aggrevation during latch installation, especially for mass production (not so much for building one case at a time). Hold one backplate in place as you...

Large Ribbed 2-Leg Plastic Stacking Corner - Flush mounts to wodden cabinet corners, or over top of carpet-covered cabinets.Screws Required For Installation: 4 (not included)Material: High-impact Plastic

Heavy duty rubber foot - May be used for any purpose requiring rubber feet on a case, or as a bumber in other applications.  Diameter: 7/8" (22mm)   Height: 9/16" (13.5mm)     Small Rubber Foot with Steel...

Port Tube - Used mostly for bass reflex, Port Tubes extend the frequency response of the driver/enclosure combination to below the range the driver would reproduce in a similarly sized sealed box.

Our backplates are a great alternative to using backing washers. Backplates save time and aggrevation during latch installation, especially for mass production (not so much for building one case at a time). Hold one backplate in place as you pop all...

Standard heavy-duty recessed cabinet handle. This is a one-piece assembly and allows for comfortable carrying of speaker cabinets. Traditionally installed with wood screws, or machine screws with nuts, washers & lockwashers...

Heavy duty rubber foot: May be used for any purpose requiring rubber feet on a case, or as a bumber in other applications.  Diameter: 7/8"" (22.5mm)   Height:  5/16" (7.9mm)     Large Rubber Foot with...