Brace Ball Corner / Large

(1 review) Write a Review
SKU:
CNSC1373
Availability:
In Stock
Weight:
0.15 LBS
Width:
2.28 (in)
Height:
2.00 (in)
Depth:
2.28 (in)
Shipping:
Calculated at Checkout
  • Brace Ball Corner / Large
  • Brace Ball Corner / Large
  • Brace Ball Corner / Large
$1.85

Description

Steel Brace Ball Corner - Acts as a ball corner and corner brace in one. Covers the joint and seams between the extrusions at the corners, as well as acting as a corner brace at the junction where the Hybrid Tongue & Groove Extrusion meets the Corner Extrusion.

Rivets Required For Installation: 6

Depending on your case design and dimensions, some rivets may require backing washers. Some rivets will install through the aluminum extrusions and therefore require no backing washers.

THIS ITEM REQUIRES NO CUTOUTS IN THE CASE WALL TO INSTALL.

RECOMMENDED USES:
All Cases

MINIMUM RECOMMENDED CASE DIMENSIONS:
N/A

EXAMPLES
- All Cases

ASSOCIATED COMPATIBLE PARTS:
- All Of Our Extrusions

Material: 1.5mm/ 0.059" Steel

View AllClose

Additional Information

Specifications Drawings:
See Parts Pictures Above
View AllClose

1 Review

  • 5
    Guitar Case Corners

    Posted by Nick A on 13th Jan 2016

    I used these on ata flight case I was building for my guitar. I wanted to keep the overall thickness of the case as thin as possible while providing maximum. These helped me achieve that. It's large ball corner and a corner brace in one. Couldn't be happier!

View AllClose