PDU-AM-6 - RACK 6 WAY POWER DISTRIBUTION
- SKU:
- PDU-AM-6 -
- UPC:
- MPN:
- Weight:
- 5.00 LBS
- Width:
- 19.00 (in)
- Height:
- 1.75 (in)
- Depth:
- 3.00 (in)
- Shipping:
- Calculated at Checkout
MSRP:
Now:
$109.00
Was:
— You save
Description
19 inch Rack Mount 6 Way Power Distribution Unit with On/Off overload trip switch, along with master surge and lightening protection plus a LED condition indicator.
High-Leakage-Current Power Surge Protection
3 Way Protection: L ~ N, N ~ E and L ~ E
Related Products


R0828-06 - RACK RAIL - 6 SPACE - EACH
MSRP:
Now:
$6.60
Was:
Full Hole Rack Rail, Tapped to 10/32 UNFBlack Powder Coated.
R0828: Use S1032/HP Rack Screws and Washers.
We recommend that you use a max Torque setting of 4kns when...


R2293-6UK - TOUR GRADE 6 UNIT RACK DRAWER
MSRP:
Now:
$185.00
Was:
Tour Grade Heavy Duty Rack Drawers with Slam Lock and Keylock- Tour Grade / Heavy Duty Rack Drawer- Space-Saving Flat Front Panel- Reinforced Rack Mounting Ears- M25 / M40 Cable Gland Knock-Outs for...
Customers Also Viewed

ABS Plastic Sheet / BLACK-** READ DETAILS BELOW**
MSRP:
Now:
$39.80
Was:
ABS Plastic Sheet
**** ABS may incur additional shipping cost with UPS not assessed at the time of order based on UPS's Dimensional Weight policies and calculations. We will contact you...


DIY Road Cases™ Flagship Educational Suite
MSRP:
Now:
$12.90
Was:
Learn Everything That You Need To Know About Building Your Own Custom Cases!
Veteran drummer & DIY Road Cases™ Creator Larry Cox takes you step-by-step through all of the...


FP02-Q-3U - 19" RACK MOUNTING ASSY WITH TWO FANS
MSRP:
Now:
$195.00
Was:
Low noise 3U Heat Extraction Units are designed to be fitted into the front or back of a 19-inch rack to suck hot air out of an enclosure. As hot air rises the best results will be achieved by...


W8675PJPBK - RECESSED CORNER CASTER
MSRP:
Now:
$14.90
Was:
Heavy duty corner caster for pull-style case applications. 3" wheel 310 lb capacity for tilt & roll pull-style cases. Fits on either side of the case (so there is no "right" or "left"...


L907/915PBZ - MEDIUM RECESSED LATCH IN OFFSET DISH WITH PADLOCKING BRACKETS Latch / Medium / Recessed / Padlock Brackets / Offsets
MSRP:
Now:
$9.40
Was:
This is a standard heavy-duty twist latch with brackets for inserting a padlock. This is a two-piece dish assembly and requires extra cuts to the tongue & groove, or hybrid, extrusions...


R1291K - 1 UNIT RACK DRAWER
MSRP:
Now:
$70.40
Was:
1 UNIT RACK DRAWER - EASY FINGER PULL OUT - ALSO CAN BE USED UPSIDE DOWN AS A SHELF


B1131 - Corner Brace
MSRP:
Now:
$1.30
Was:
Heavy Duty Steel Corner Brace For Use With Full-length Extrusions - Mates with all of our extrusions for 1/4", 3/8", and 1/2" wall panel thicknesses full-length extrusions ...


M154306 - POLE FOR SPEAKER CABINETS - 1 3/8" DIA (with end caps)
MSRP:
Now:
$10.22
Was:
USE WITH SPEAKER POLE CUPS M1557 & M1538


RADM-23C - RACK 1ULED MULTICOLOR RACK LIGHT
MSRP:
Now:
$119.00
Was:
1U LED Multi Color Rack Light for use in 19 inch equipment racks and can be fitted at the front or back of the rack. Colour and Pattern programming is via push buttons on the top of the case.-15 x...


P2554Z - PREMIUM HINGED LID STAY - recessed
MSRP:
Now:
$9.40
Was:
Large Recessed Hinged Lid Stay - This surface-mount lid stay has a built-in hinge. May be used as a stand-alone hinge (one at a time, in pairs, or more depending on case size) in place of a...