null

CORNERS

CORNERS

Join Your Most Vulnerable Junctions With Our Heavy Duty Corners For Any Application. Corners maintain a protective joint at the most common impact points of a case - the eight corner positions. They are also provide a visually appealing way to join areas where two or more corner angle extrusions meet. We recommend corners with offsets for extrusions when possible. This provides for a flush, and clean looking, installation. All steel corners are made from the highest quality materials, utilizing high-endurance zinc protective finishes, unless noted otherwise.

Finish: Zinc Finish (unless another option is listed)

REMEMBER, we wanted to keep the DIY Road Cases® Store simple, and make your decision-making even easier. In this section we list only the most common corners requested, and purchased, by our thousands of customers. However, anything you could ever need, for any type of case, is available. If you don't see it here, please see our I Really Need That!™ Parts Section.If you don't see it there, just contact us and we'll get you what you need!

  • C1855Z - FLAT CORNER LARGE - male - stacking C1855Z - FLAT CORNER LARGE - male - stacking
    Add to Cart

    C1855Z - FLAT CORNER LARGE - male - stacking

    $2.10
    Large Steel Flat Corner With Male Stacking Foot. Smaller profile. Covers the joint and seams between the extrusions at all corners.Rivets Required For Installation: 6  OUR RIVETS DO NOT FIT THESE HOLES - EITHER DRILL...
    $2.10
    Add to Cart
  • 1008 - BALL CORNER - large - stackable 1008 - BALL CORNER - large - stackable
    Add to Cart

    1008 - BALL CORNER - large - stackable

    $2.10
    Heavy Duty Steel Ball Corner With Stacking Dimple. Mates with all of our extrusions for 1/4", 3/8", and 1/2" wall panel thicknesses. Covers the joint and seams between the extrusions at all corners and allows for stacking like-sized...
    $2.10
    Add to Cart
  • C1860Z - FLAT CORNER - LARGE - female - stacking C1860Z - FLAT CORNER - LARGE - female - stacking
    Add to Cart

    C1860Z - FLAT CORNER - LARGE - female - stacking

    $2.10
    Large Steel Flat Corner With Female Stacking Dimple. Smaller profile. Covers the joint and seams between the extrusions at all corners.Rivets Required For Installation: 6  OUR RIVETS DO NOT FIT THESE HOLES - EITHER...
    $2.10
    Add to Cart
  • 1014 - BALL CORNER - DE LUX - stackable 1014 - BALL CORNER - DE LUX - stackable
    Add to Cart

    1014 - BALL CORNER - DE LUX - stackable

    $2.50
    Heavy Duty Steel Ball Corner With Offset For Extrusions And Stacking Dimple. Mates with all of our extrusions for 1/4", 3/8", and 1/2" wall panel thicknesses. Covers the joint and seams between the extrusions at all corners and allows...
    $2.50
    Add to Cart
  • C0680Z - QUICK LID CORNER /  custom 2 leg C0680Z - QUICK LID CORNER /  custom 2 leg
    Add to Cart

    C0680Z - QUICK LID CORNER / custom 2 leg

    $1.80
    Quick Lid™ Corner. This special 2-leg corner is for use only with our CNSL0490 Quick Lid™ Extrusion. This special 2-leg design has channels that wrap the interior corners of the CNSL0490 Quick Lid™ Extrusion. Contact...
    $1.80
    Add to Cart
  • C1349Z - BRACE / BALL CORNER - heavy duty C1349Z - BRACE / BALL CORNER - heavy duty
    Add to Cart

    C1349Z - BRACE / BALL CORNER - heavy duty

    $2.00
    Steel Brace Ball Corner. Heavy duty ball corner with corner brace built-in for thin profile lids, or to be used with lid-maker extrusions. Covers the joint and seams between the extrusions at all corners, as well as covering...
    $2.00
    Add to Cart
  • C1082Z - BRACE BALL CORNER - medium C1082Z - BRACE BALL CORNER - medium
    Add to Cart

    C1082Z - BRACE BALL CORNER - medium

    $1.70
    Steel Brace Ball Corner. Heavy duty ball corner with corner brace built-in for thin profile lids. Covers the joint and seams between the extrusions at all corners, as well as covering hybrid tongue & groove extrusion without...
    $1.70
    Add to Cart
  • C0675Z - FLAT CORNER MEDIUM - plain C0675Z - FLAT CORNER MEDIUM - plain
    Add to Cart

    C0675Z - FLAT CORNER MEDIUM - plain

    $1.60
    Medium Steel Flat Corner. Smaller profile. Covers the joint and seams between the extrusions at all corners.Rivets Required For Installation: 3Depending on your case design and dimensions, some rivets may require backing...
    $1.60
    Add to Cart
  • C1150Z -  FLAT CORNER - MEDIUM - male stacking C1150Z -  FLAT CORNER - MEDIUM - male stacking
    Add to Cart

    C1150Z - FLAT CORNER - MEDIUM - male stacking

    $1.70
    Medium Steel Flat Corner With Male Stacking Foot. Smaller profile. Covers the joint and seams between the extrusions at all corners.Rivets Required For Installation: 3Depending on your case design and dimensions, some rivets...
    $1.70
    Add to Cart
  • C0679 - TRIANGULAR REINFORCED CORNER - flat C0679 - TRIANGULAR REINFORCED CORNER - flat
    Add to Cart

    C0679 - TRIANGULAR REINFORCED CORNER - flat

    $1.90
    Steel Triangular Ball Corner. Smaller profile. Covers the joint and seams between the extrusions at all corners.Rivets Required For Installation: 3Depending on your case design and dimensions, some rivets may require backing...
    $1.90
    Add to Cart
  • C1935Z - FLAT CORNER - MEDIUM - stacking - female C1935Z - FLAT CORNER - MEDIUM - stacking - female
    Add to Cart

    C1935Z - FLAT CORNER - MEDIUM - stacking - female

    $2.10
    Medium Steel Flat Corner With Female Stacking Foot. Smaller profile. Covers the joint and seams between the extrusions at all corners.Rivets Required For Installation: 3Depending on your case design and dimensions, some...
    $2.10
    Add to Cart
  • C1352Z - BALL CORNER - low prophile C1352Z - BALL CORNER - low prophile
    Add to Cart

    C1352Z - BALL CORNER - low prophile

    $1.80
    Steel Ball Corner - Can be used on all corners, but is the perfect match for the bottom case corners when using the C1358Z on the 4 lid corners with our lidmaker extrusion, or on any case that utilizes the Brace Ball Corner on the lid. This corner...
    $1.80
    Add to Cart
  • 1060 - FLAT CORNER - small 1060 - FLAT CORNER - small
    Add to Cart

    1060 - FLAT CORNER - small

    $0.80
    Small Steel Flat Corner. Smaller profile. Covers the joint and seams between the extrusions at all corners.Rivets Required For Installation: 3Depending on your case design and dimensions, some rivets may require backing washers...
    $0.80
    Add to Cart
  • C1353Z - BALL CORNER -  medium stacking C1353Z - BALL CORNER -  medium stacking
    Add to Cart

    C1353Z - BALL CORNER - medium stacking

    $2.10
    Medium Stackable Steel Ball Corner. Smaller profile. Covers the joint and seams between the extrusions at all corners.Rivets Required For Installation: 3Depending on your case design and dimensions, some rivets may require backing...
    $2.10
    Add to Cart
  • C1373 - BRACE BALL CORNER - large C1373 - BRACE BALL CORNER - large
    Add to Cart

    C1373 - BRACE BALL CORNER - large

    $2.70
    Steel Brace Ball Corner - Acts as a ball corner and corner brace in one. Covers the joint and seams between the extrusions at the corners, as well as acting as a corner brace at the junction where the Hybrid Tongue & Groove Extrusion...
    $2.70
    Add to Cart

Join our new Facebook group:  DIY Road Cases Connections

 

Connect with other builders and share tips, ideas and your builds.  Join this group for exclusive deals and offers which will only be available to group members.